Acceleration physics, shown working

See why one car is quicker, not just that it is.

Zavarion is a free educational site that simulates straight-line acceleration and shows which inputs decide the result: mass, power, gearing, traction and drag. Every vehicle figure is labeled as manufacturer-claimed, measured, modeled or assumed, and every modeled result lists the assumptions behind it.

Start with 0–60 mph vs 0–100 km/h

DraftThis page has not completed editorial review. It is hidden from search engines until it has.

Fig. 13.44 km/h apart

Two tests, two finish lines

A 0–60 mph run ends at 96.56 km/h. A 0–100 km/h run keeps going for another 3.44 km/h. How long that takes depends on the car.

The last stretch of the speed scale, to scale. A 0–60 mph run ends at the first mark; a 0–100 km/h run carries on to the second.

What you can do here now

Each guide below answers one question, shows the equations behind the answer, and has an experiment on an illustrative car or a calculator you can change yourself.

All guides

Tool

Model a car from your own numbers

Enter the mass, power, torque, gearing and tires of any car, real or imagined, and the model runs it. Add a second set of inputs to see which one decides the difference. The results are labeled as modeled from your inputs, because this site has not checked them.

Open the custom vehicle tool

Status

Real-car estimates are modeled, not measured

Modeled times are shown for real, named cars only where every figure the model needs has a source and has been transcribed twice independently. The model has not been compared with instrumented tests of those cars, so each estimate comes with a range, is kept apart from the manufacturer’s own figure, and is labeled as modeled.

Four kinds of number, never mixed

A quoted acceleration time means little unless you know where it came from. Every figure about a vehicle on this site carries one of these labels, shown with a word and a shape as well as a color. Results of plain arithmetic, such as unit conversions and the calculators in the guides, are marked as arithmetic instead.

Manufacturer-claimed
Published by the vehicle’s maker, under the maker’s own test conditions.
Instrumented test (measured)
Recorded with timing equipment in a real test of a real vehicle by an identified tester.
Modeled estimate
Calculated by this site’s physics model from stated inputs. Not a measurement.
Assumption
An input that is not published for the vehicle, chosen by the model with a stated range.

What this site will and will not claim

It will

  • Show modeled results as a range, not a single falsely precise number
  • List the assumptions and the model version behind every modeled result
  • Link each published specification to its source
  • Say “too close to call” when the model cannot separate two cars
  • Explain which input causes a difference, by changing one input at a time

It will not

  • Present a modeled estimate as a measured or manufacturer figure
  • Rank two cars when the difference is inside the uncertainty
  • Publish times for a real car before its data and the model have passed their checks
  • Judge a car’s overall quality, durability or safety from a straight-line result
  • Help plan racing or speeding on public roads; every scenario assumes a closed course

How the model works, in one paragraph

The model moves a car forward in small time steps. At each step the driving force is the smaller of what the powertrain can deliver through the current gear and what the tires can pass to the road, allowing for weight shifting rearwards under acceleration. Aerodynamic and rolling resistance are subtracted, and what remains accelerates the car and its rotating parts. The same code runs in your browser and when these pages are built, so a result can be reproduced from its inputs, assumptions and model version.

Current model version: 0.3.0. It has not yet been compared with instrumented test results.

Read the full methodology